Telemetry Terminals

MiTrack GT1 is an advanced telemetry terminal which is developed for (IoT) to remote control and data collection from industrial field.miTrack GT1 can be programmed to multiple roles, with these main headings,

• Analog and Digital Inputs and Outputs
• Gateway for Sensor Network
• Ethernet and GPRS Bridge over RS232 and RS485
• ModBus GateWay
• USB Modem (PPP)
• Data Logger Automatic
• Meter Reading Terminal

MiTrack GT1 can be used both with analog - digital ports and multisensors, I/O multiplexer, serial port, RS485. Also available for to use as a gateway with connected devices over ModBus. GT1, Ethernet and GSM / GPRS properties have together. When device can not reach to the servers over ethernet, tries GPRS connection. All data that sent to server and can not be sent are stored 4 GB SD memory. Also re-access is available for necessity data again. GT1 is a data logger device with this feature. GT1 can be connect to MCR08-L with TFT touch screen. In this way, sensor values and alarms can be followed by the operators as visual in facility. Numerous devices that comunicating with ModBus or Multisensor Bus can be read with GT1. MiTrack-GT1 collects data from those peripherals

• Contactless Card Readers
• Temperature and Humidity Sensors
• Energy Meters
• Motion Sensors
• Liquid level sensors
• Gas detectors

miTrack-V is a special designed automotive grade terminal which developed for on-board vehicle telemetry and tracking. MiTrack-V is suitable with Built-in GPS receiver for use in vehicle tracking and fleet management system with precise location information along with the data packets. Device can be connect to numerous sensors and peripherals over ModBus and Multisensor Bus. Peripherals which has 4-20 mA or 0-10V sensor interface can be read directly from analog input ports. mitrack-V is available with RS232 port on the vehicle as a transparent modem terminal.RFID or barcode readers can communicate with servers over miTrack-V. mitrack-V has a built-in acceleration sensor. The driving dynamics and the exposure to shock and vibration conditions of the vehicle or mobile platforms is can be measured and transmit to servers. The device can be started directly inserting the SIM card and IP-Port Parameters can be changed via sending a SMS or connecting to computer over RS232

ethemetry is Ethernet telemetry unit was developed for use in fixed installations and facilities. Device is available both OEM and rail mountable plastic enclosure. Device can be connect to numerous sensors and peripherals over ModBus and Multisensor Bus. Peripherals which has 4-20 mA or 0-10V sensor interface can be read directly from analog input ports. An additional feature of ethemetry is that the terminal has 8 relay outputs. A suitable solution for applications that require control relay over Ethernet. Also 8 NPN input can be used for to read remotely standart sensors. Optional GSM/GPRS is available for dual communication mode. With this option when device can not reach to the servers over ethernet, tries GPRS connection